10 Zone Fire Panel

10 Zone Micro Controller Based fire alarm panel. Supports 2 wire standard smoke detectors, Can attach speech dialer, Operating Voltage 24V, Individual zone indication, 3-7 digit user code, sturdy sheet metal cabinet with transparent cover and lock & key to prevent unauthorised access.

SEC - F10



  • Supports 2 wire international standard smoke detectors.
  •  Facility to attach speech dialer
  •  Cabinet closed with a lock and key to restrict the access
  •  Common tamper led for open or short in any zone
  •  Panel can be programmed by a user code with user programmable 3-7 digit code
  •  Panel can be armed or disarmed through code or a dedicated key
  •  Any zone can be omitted
  •  Manual call points can be operated even when some detectors have been removed
  • 12 event fire memory log with non-volatile memory
  •  Sounders start automatically when fire is detected and can be programmed from 2 to 20 minutes
  •  Single dedicated key to arm the panel and disarm the panel
  •  Single dedicated key to manually start sounders and switch off the sounders
  •  Single dedicated key for zone led test and for drill exercise
  •  Two sounder outputs, each can switch 1 amp
  •  Higher power sounders can be attached through an inbuilt relay
  •  Battery space provided within the panel with plug in connectors



Technical Specification

Mains Input Voltage 220V
System Operating Voltage 24V DC
Zone Voltage 18V to 28V DC
Zone Quiescent Current 2.4 mA
Panel Output Current 2 Amp Max
Sounder Rating 24 V
Sounder Fuse 2 Amp 20mm
Auxiliary Fuse 1 Amp 20mm
Maximum Sounder Output 1 Current 1 Amp
Maximum Sounder Output 2 Current 1 Amp
Battery Voltage 24 V, 7 AH (12V X 2)
Battery Type SMF
Battery Recharge Voltage 13.8 +/- 0.2 V DC
Internal Buzzer Piezo Type
Cable Entry Through provided holes in main outer cabinet
Operating Temperature 0 C to 50 C
Storage Temperature -20C to 60C
Humidity 93% non-condensing max
Panel Dimensions 375mm X 300mm X 103mm
Max Battery Dimensions 150mm x 110mm x 64mm