Multicomm Series 12 Zone Control Panel with Onboard Key Pad


Multicomm Series 12 Zone Control Panel with Onboard Key Pad, Optional IP, GPRS, GSM communication, 10 programmable zones, Inbuilt Power Supply.
 

SEC 10

 

Features:

  •     Micro-controller based
  •     12 zone control panel
  •     Extremely user friendly
  •     Optional IP, GPRS, GSM communication (add on modules)
  •     Multiple Communication options: IP+GPRS+GSM / IP+GPRS / IP+GSM / GSM+GPRS / IP / GPRS / GSM (through add on modules)
  •     Onboard 16 key backlit keypad – single station unit for small format installations
  •     18 LED display
  •     3 - 7 digit code
  •     10 independently programmable zones as delay, immediate, panic or fire
  •     2 permanent 24 hours zones - panic & tamper
  •     Easy to use with simultaneous led status display
  •     6 LEDs indicate operational status
  •     12 LEDs indicate individual zone status
  •     Can connect five additional remote key pads (optional)
  •     Programmable entry/ exit time 2 to 255 seconds
  •     Programmable sounder time 2 to 20 minutes
  •     Automatic arming at pre-set time
  •     Automatic disarming at pre-set time
  •     Provision for holiday
  •     Silent arming
  •     Night mode arming
  •     Chime facility
  •     Dedicated fire, panic and arm quick keys
  •     Unique sound for fire alarm
  •     Non-volatile memory
  •     Bell and strobe light output
  •     Open zone indication
  •     Self test on reset
  •     Walk test facility
  •     Automatic rearming after an intrusion
  •     Facility to attach speech dialer
  •     Only three incorrect attempts allowed to disarm the system after which the system goes in to alarm state
  •     Multiple sounder outputs
  •     Inbuilt tamper switch
  •     Provision for built in battery backup
  •     Elegant white ABS housing

Datasheet

Technical Specification

ELECTRICAL
Quiescent current: 75ma typical with all LED's and internal buzzer on
Maximum sounder current output: 1A
Maximum Strobe light current output: 1A
Sounder and strobe saturation Voltage: <1V at 1A
Remote keypads: five (max)
Non volatile Memory: Programming and Log
Zone response time: <500mS
Zone Loop Resistance: <5kohm for Normally Closed

POWER SUPPLY
Mains supply Voltage: 220+10% -15% 50Hz
Total current Output: 1500MA at 220V AC (Fuse JA 20mm on main card)
Regulation: <9%
Ripple: <200mv RMS
Battery Voltage: 12V DC
Battery type: SMF Rechargeable
Battery Recharge voltage: 13.8V +/-0.2V DC
Fuse: 250ma 20mm AC Mains on Power Supply Card

ENVIRONMENTAL
Operating Temperature: 0C to 45C
Storage Temperature: -20C to 60C
Maximum humidity: 95% non -condensing
Environment: residential / commercial / light Indus trial

PHYSICAL
Dimensions: 236 mm x 226mm x 80mm
Max Battery Dimensions: 150mm x 110mm x 64 mm

NOTE: SPECIFICATIONS MAY CHANGE WITHOUT PRIOR NOTICE

Download